Innovative eco-social housing neighbourhood reaches completion in Wales

A version of this article was published on The Fifth Estate on 17 May.

Glen Peters standing outside one of the two-bedroomed semi-detached houses.

The first tenants have moved into Pentre Solar, an eco-social housing neighbourhood being constructed in Glanrhyd, Wales. ('Pentre' means village in Welsh.)


Dr Glen Peters, chief executive of Western Solar, has an ambition for his company to supply 1000 homes and to work with housing associations and local authorities to provide social housing.

The South-facing front of a three bedroomed house with plenty of glazing to capture the sun's heat. Inside it falls onto a black, melamine-covered concrete floor to absorb the heat.

The North-facing rear of a three bedroomed house. The homes are clad in local larch. This is projected to last at least 25 years before it needs replacing. Much care in the detailing of the design should extend the cladding life well beyond this point.

Peters estimates the build cost is about £120 per square foot (AU$19 a square metre). This has led him to set a rental cost of the two-bedroom houses of £480 a month (AU$836), a level in line with the local 106 planning condition of no more than 80 per cent of local market rents. The three-bedroom houses are set at £620 a month (AU$1080). For the developer, this gives a 3.5-4 per cent return on investment.

A pair of two-bedroomed semi-detached houses. All the homes have solar roofs.

Local materials and labour

Costs have been kept low and as much as possible of the houses manufactured locally from local materials. In total 80 per cent of the building is manufactured locally out of local timber and 40 per cent – the airtight frames – are manufactured in a nearby factory – a converted cowshed – to be assembled on site.

Peters says the multiplier effect of the benefit to the local community for every £1000 invested is £2200, a factor of 2.2.

The timber frames are kept out of direct contact with the ground to prevent damp from rising:

A footing protected from damp on the patio.

The homes’ design builds upon the developer’s experience of a prototype house, Ty Solar:

The prototype Ty Solar (Ty is Welsh for House so the name means Solar House in English) in West Wales. In the background can be seen the first solar farm in Wales which finance the building of Ty Solar.

Ty Solar was constructed in 2010 using the profit from Peters’ solar farm, the first in Wales. It cost about £75,000 (AU$130,640) to build with a £47,000 (AU$81,870) grant from the Sustainable Development Fund.

The unit costs of the Glanrhyd houses, built on the site of a now-demolished garage, were higher than normal, mainly because of the land reclamation, provision of services and unusual weather-related costs, as well as complying with planning conditions in an area of outstanding natural beauty.

The three-bedroom homes occupy 100 square metres, the two-bed ones slightly less, but still feel spacious.

The company is focused on providing social housing as Peters believes there is a reasonable business in creating good quality affordable housing, as none of the large developers seem to interested in doing so.

While it is economic and technically feasible to build these homes, politically Peters’ route has not been easy.

”Politicians have been unduly influenced by volume building companies, and while they love the houses it has been difficult to persuade local authorities and housing associations of the benefit of backing this design, despite the fact that occupants have virtually zero energy bills. The key performance indicators imposed on housing associations are unduly skewed towards capital costs rather than tenant and community welfare,” he says.

He is hoping that when he has occupancy data to back up his case, more housing associations and councils will be interested in the model.

Zero energy bills

The timber frame houses are built according to passive house principles, though are not validated as such due the cost of doing so, versus the benefits.

Each monopitch roof sports 8kW of integrated photovoltaic panels. Over a year these generate surplus energy, providing an income from a feed-in tariff, as well as giving the occupants free electricity. Total energy demand is about 12 per cent of a conventionally built home. Beneath the solar panels is a galvanised steel sheet that laps over the timber frame.

They sit on a concrete slab, unlike the prototype, which was constructed using the box beam method with a suspended timber floor. Peters says concrete is more durable, with more thermal mass and has a lower maintenance requirement, although with a greater carbon footprint.

The windows are double, not triple-glazed, to keep costs low as Peters believes that the incremental benefit of the extra pane of glazing is cancelled by the cost in the mild local climate.

The insulation is all 27cm of recycled newsprint pumped into the cavity. This type of eco-insulation is in general the most economic and ecological. The paint is clay-based – breathable and with no off-gassing. Although more expensive per litre, it requires fewer coats on bare plaster.

The houses all come fitted out with the most efficient washing machine, condenser drier, kitchen, water-saving bathroom with occupancy sensors in areas such as toilets, internet connection, Wi-Fi and an outside socket for charging an electric vehicle. There are LED lights throughout.

All of these relatively spacious homes are provided with the most energy-efficient appliances and exceptional attention to detail.

Communal electric car

The Nissan Leaf charging outside one of the houses.

The occupants of the estate have been given a Nissan Leaf to use collectively, charged by the solar panels on the roofs.

“It’s a way of getting neighbours to cooperate with each other and eliminate the need for a second car,” Peters says.

Energy storage

The South-facing homes are generous in their space, their form determined by the maximum depth allowed by the passive heating.

The rest of the heating is provided in a surprising manner, using the best of old technology with new: solar electricity and storage heaters.

An installed storage heater; proven, old technology meeting the new.

Storage heaters contain thermally massive blocks that are heated up by an element. They then release that heat gradually over many subsequent hours.

This form of energy storage was introduced to British homes in the 1960s and ’70s on a special tariff called Economy 7. Since nuclear power stations could not be switched off, unlike other forms of electricity generation, these tariffs allowed people to use nuclear electricity at night – at a lower rate when national demand was low – to charge the storage heaters.

The problem was that by the time the heat was needed, the following evening, they were often too cool and many people subsequently removed them and installed central heating instead.

Here, the idea is to let the storage heaters be heated up during the day by the solar panels on the roof, meaning they are able to provide adequate heating through the evening and night provided that there has been average sunshine (50 per cent of a June summer’s day) during the day.

This may not be the case in the depths of winter and so the homes are also grid-connected. They export surplus energy when there is some – after the electric car and storage heaters have been topped up – and purchase it when not enough has been generated.

“Storage heaters are incredibly cheap,” Peters says, “and a well proven technology. Whereas the storage we had to start with in the prototype house – lithium-ion batteries – were designated a fire risk and we had them taken out. They are also much more expensive.”

A pair of two-bedroomed semi-detached passive solar houses.

The prototype house has been monitored and has well exceeded the predicted generation capacity, providing twice the electricity used over the year.

Peters says: “We have spent £2 million (AU$3.5m) researching and developing a sustainable timber building system that is 100 per cent British, powered by solar energy. We hope now to create 1000 homes across Wales and the UK, once the current political uncertainty is out of the way and we have won the argument on the efficacy of timber housing.”

David Thorpe is the author of a number of books on energy efficiency, sustainable building and renewable energy, including:

• The Expert Guide To Energy Management In Buildings
• The Expert Guide to Solar Technology and
• The Earthscan Expert Guide to Retrofitting Homes for Efficiency.

Find out more and buy the books here.

The cheap and reliable form of solar energy storage for homes that is already on the market

How should we store solar electricity? How about as heat? A Swedish research team is storing solar energy in liquid form, but it is still a way off being commercially available. A competing technology using molten salt is already on the market and shortlisted for a major renewable energy prize. But there is already a much cheaper and already well-proven solution now being used in a brand new context...

A shorter version of this article has appeared on The Fifth Estate.

The problem

Solar photovoltaic power it is increasingly being installed on buildings but a major challenge is that it is difficult to store so that it can be delivered when needed.

Storing solar electricity as heat is useful because the world uses more than twice as much energy in the form of heat as electricity. So for solar power to become ubiquitous, it needs to be delivered as heat more than as electricity – and round the clock.

Liquid solar energy

The solution of researchers at Chalmers University of Technology in Sweden is a chemical liquid that can tranport solar energy and then release it as heat whenever it is needed. The research, described in March’s edition of Energy & Environmental Science, describes how the team came up with a way of copying the means by which plants store solar energy – in molecules.

Transforming it into bonds between atoms in a liquid chemical makes it possible to transport it as well as store it.

“The technique means that that we can store the solar energy in chemical bonds and release the energy as heat whenever we need it,” says Professor Kasper Moth-Poulsen, who is leading the research team.

“Combining the chemical energy storage with water heating solar panels enables a conversion of more than 80 per cent of the incoming sunlight.”

The research project has come a long way since it began six years ago when the solar energy conversion efficiency was 0.01 per cent and the expensive element ruthenium played a major role in the compound.

Four years later, the system stores 1.1 per cent of the incoming sunlight as latent chemical energy – an improvement of a factor of 100, and ruthenium has been replaced by much cheaper carbon-based elements.

“We saw an opportunity to develop molecules that make the process much more efficient,” Moth-Poulsen says.

“At the same time, we are demonstrating a robust system that can sustain more than 140 energy storage and release cycles with negligible degradation.”

The process is based on the organic compound norbornadiene, which upon exposure to light converts into quadricyclane.

Hybrid panels

The rooftops of buildings can take advantage of the benefits of installing both solar water heating and photovoltaic modules.

Typical efficiencies for photovoltaic modules are now at least 20 per cent. Solar water heating systems have an efficiency of between 20-80 per cent, depending on the application, location and the required temperature.

Solar water heating systems make use of the full solar spectrum, whereas photovoltaics can only harvest a much more limited proportion.

Some companies have used this difference to design hybrid panels which contain both solar water heating and photovoltaic cells, particularly since the water can be used to stop the photovoltaic panels overheating, making them more efficient. The downside is the expense.

The Swedish researchers think that one of the potential applications for their technology, when it has become more efficient, will be a new generation of hybrid panels that utilise the heat, which can be released from the liquid storage medium.

Concept diagram for the hybrid solar panels

They say that combining solar water heating with their system allows for efficient usage of low energy photons for solar water heating combined with storage of the high-energy photons in the form of chemical energy.

Their simulations have persuaded them that these hybrid panels could be up to 80 per cent efficient. In terms of energy density they are comparable to a lithium ion battery.

The team will continue work on the technology to evaluate the potential cost and bringing it down by finding a way to mass produce the constituent chemicals, and to find a non-toxic solvent.

More than a pinch of salt

A totally different technology is from Sunamp, a British company that has developed its technology by collaborating with the University of Edinburgh School of Chemistry. It guarantees low-cost materials, exceptional long life, recyclability, safety and high energy density.

The technology has been shortlisted for the 2017 Ashden UK Awards alongside the work of the Passivhaus Trust and the Carbon Co-op, a community benefit society that helps its members to retrofit their homes.

An engineer installing the solar salt battery.

Sunamp’s form of storage uses a salt as a phase change material. This absorbs and releases thermal energy during the process of melting and solidifying respectively.

Similar technology is used on a large scale with concentrating solar thermal power stations, typically located in hot, arid deserts.

In this case it is used for storing energy from photovoltaic panels, waste process heat, or heat from heat pumps and micro CHP (combined heat and power) systems, in order to increase efficiency.

How does it work? In the case of storing solar electrical energy, an electrical element connected to the solar panels heats up the salt, thereby melting it.

The salt is kept liquid in a vacuum-insulated container. When heat is required, cold water is passed through the liquid in a heat exchanger, absorbing the heat and causing the salt to re-solidify. The heated water passes to the tap and the salt is ready to be charged again.

Sunamp’s batteries come in various sizes and can be used in series, meaning they can be used in anything from small homes to large hotels, for example. They take up much less space than a hot water tank, can store heat for longer and are more efficient.

The battery can store heat at half the weight of hot water in a tank storing the same amount of energy. Whether they are cost-effective depends upon the location and pattern of usage.

The easy solution

Tenants moving into a new passive solar mini-housing estate in Wales – Pentre Solar, Glanrhyd, near Cardigan – have roofs covered with grid-connected solar panels and zero energy bills.

The brand new passive solar homes for affordable social housing, covered in solar panels.

Dr Glen Peters, CEO of Western Solar, which is behind the development, has an ambition for his company to supply 1,000 homes and to work with housing associations and local authorities to provide sustainable, solar-powered social housing.

The occupants of the estate have been given a Nissan Leaf electric car to use collectively, charged by the solar panels on the roofs. So that's one form of storage.

But the homes' heating is provided in a surprising manner, using the best of old technology with new: solar electricity and storage heaters.

An installed storage heater in a passive solar house; proven, old technology meeting the new.

Storage heaters contain thermally massive blocks which are heated up by an element. They then release that heat gradually over many subsequent hours.

This form of energy storage was introduced to British homes in the 1960s and '70s on a special tariff called Economy 7. Since nuclear power stations could not be switched off unlike other forms of electricity generation, these tariffs allowed people to use nuclear electricity at night – at a lower rate when national demand was low – to charge the storage heaters.

The problem was that by the time the heat was needed, the following evening, they were often too cool and many people subsequently removed them and installed central heating instead.

Here, the idea is to let the storage heaters be heated up during the day by the solar panels on the roof, meaning that they are able to provide adequate heating through the evening and night provided that there has been average sunshine (50% of a June summer day) during the day.

This may not be the case in the depths of winter and so the homes are also grid-connected. They export surplus energy when there is some – after the electric car and storage heaters have been topped up – and purchase it when not enough has been generated.

"Storage heaters are incredibly cheap," says Glen, "and a well proven technology. Whereas the storage we had to start with in our prototype house – lithium ion batteries – were designated a fire risk and we had them taken out. They are also much more expensive – a couple of hundred rather than thousands of pounds."

This sounds like a solar energy storage solution that deserves far wider application. Good luck to the other technologies, but if I was looking for energy storage for a house, I know which I would choose.

David Thorpe is the author of a number of books on energy efficiency, sustainable building and renewable energy, including The Expert Guide To Energy Management In Buildings and The Expert Guide to Solar Technology and The Earthscan Expert Guide to Retrofitting Homes for Efficiency. Find out more and buy the books here.